INSTANT RFQ

Request a Quote for Part Number J-D4A-019 under NSN 5945-01-463-9427 of Leach International Corporation

Part Number: J-D4A-019
Alternate P/N: JD4A019
NIIN: 014639427
Item Name : Relay Electromagnetic
CAGE Code: 58657
FSG: 59 Electrical and Electronic Equipment Components
Country : USA
NCB Code : 01

Defence NSN Source is a one-stop shop for Relay Electromagnetic components and other similar products that meet the needs of our customer base. You have taken a specific interest in part number J-D4A-019, a Leach International Corporation offering we carry that is listed alongside the NSN 5945-01-463-9427 to streamline identification and procurement. If you fill out and submit the Request for Quote (RFQ) form located below, you can secure pricing options for your comparisons. Within 15 minutes of one of our team members receiving and reviewing your submission, you can anticipate a customized response.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

We strive to make the procurement process more straightforward and efficient by offering comprehensive details for listed components whenever possible. For instance, part number J-D4A-019 was manufactured by Leach International Corporation under the CAGECode 58657. Moreover, by using the first digits of the NSN 5945-01-463-9427, we can see that this product belongs to FSC 5945 Relays and Solenoids. Utilizing such information, you can ensure that you are securing precisely what you need to carry out operations or meet your project requirements. Keeping this in mind, obtain a quote on part number J-D4A-019 with our online services.

NSN Information for Part Number J-D4A-019 with NSN 5945-01-463-9427, 5945014639427

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-463-9427

Item PartTypeName:

RELAY,ELECTROMAGNETIC

5945014639427NA
CIICHCCESDPMICCriticalityENAC
AG0
Part NumberISCRNVCRNCCHCCMSDSSADC
J-D4A-019523

Characteristics Data of NSN 5945-01-463-9427, 5945014639427

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.718 INCHES MAXIMUM"
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.396 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY"
ABKWOVERALL HEIGHT1.310 INCHES NOMINAL"
ABMKOVERALL WIDTH0.525 INCHES MAXIMUM"
ABTDMOUNTING SLOT WIDTH0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ADZCENVIRONMENTAL PROTECTIONHERMETIC"
AKDXWINDING QUANTITY1"
APCNCOIL QUANTITY1"
APNAWINDING DC RESISTANCE RATING320.0 OHMS NOMINAL SINGLE WINDING"
APNPDUTY TYPECONTINUOUS"
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 SLOTTED HOLE SINGLE MOUNTING FACILITY"
CBBLFEATURES PROVIDEDPOLARIZED"
CQYJMOUNTING FACILITY PATTERNIN-LINE SINGLE MOUNTING FACILITY"
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY"
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE15.0 AMPERES AC RESISTIVE LOAD AND 15.0 AMPERES DC RESISTIVE LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE2.0 AMPERES AC LAMP LOAD AND 2.0 AMPERES DC LAMP LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE6.0 AMPERES AC MOTOR LOAD AND 4.0 AMPERES DC MOTOR LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE8.0 AMPERES AC INDUCTIVE LOAD AND 8.0 AMPERES DC INDUCTIVE LOAD"
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS200.0 AC AND 28.0 DC"
FEATSPECIAL FEATURESTEMP RANGE MINUS 70.0 DEG TO PLUS 125.0 DEG C; PICKUP VOLTAGE 18.0 VDC MAX; HOLD VOLTAGE 7.0 VDC; DROP-OUT VOLTAGE 1.5 VDC MIN; COIL CURRENT 0.11 AMP MAX; TERMINAL STRENGTH 5.0 LBS NOMINAL; PINS ARE UNDERPLATED (EXCEPT POLARIZING PIN IS TIN"
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD"
TTQYTERMINAL TYPE AND QUANTITY8 PIN ALL FUNCTIONS"
ABHPOVERALL LENGTH1.718 INCHES MAXIMUM"
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.396 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY"
ABKWOVERALL HEIGHT1.310 INCHES NOMINAL"
ABMKOVERALL WIDTH0.525 INCHES MAXIMUM"
ABTDMOUNTING SLOT WIDTH0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY"
ADZCENVIRONMENTAL PROTECTIONHERMETIC"
AKDXWINDING QUANTITY1"
APCNCOIL QUANTITY1"
APNAWINDING DC RESISTANCE RATING320.0 OHMS NOMINAL SINGLE WINDING"
APNPDUTY TYPECONTINUOUS"
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 SLOTTED HOLE SINGLE MOUNTING FACILITY"
CBBLFEATURES PROVIDEDPOLARIZED"
CQYJMOUNTING FACILITY PATTERNIN-LINE SINGLE MOUNTING FACILITY"
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY"
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE15.0 AMPERES AC RESISTIVE LOAD AND 15.0 AMPERES DC RESISTIVE LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE2.0 AMPERES AC LAMP LOAD AND 2.0 AMPERES DC LAMP LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE6.0 AMPERES AC MOTOR LOAD AND 4.0 AMPERES DC MOTOR LOAD"
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE8.0 AMPERES AC INDUCTIVE LOAD AND 8.0 AMPERES DC INDUCTIVE LOAD"
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS200.0 AC AND 28.0 DC"
FEATSPECIAL FEATURESTEMP RANGE MINUS 70.0 DEG TO PLUS 125.0 DEG C; PICKUP VOLTAGE 18.0 VDC MAX; HOLD VOLTAGE 7.0 VDC; DROP-OUT VOLTAGE 1.5 VDC MIN; COIL CURRENT 0.11 AMP MAX; TERMINAL STRENGTH 5.0 LBS NOMINAL; PINS ARE UNDERPLATED (EXCEPT POLARIZING PIN IS TIN"
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD"
TTQYTERMINAL TYPE AND QUANTITY8 PIN ALL FUNCTIONS"

Related NSN Components of J D4A 019

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top