Defence NSN Source is a one-stop shop for Gear Helical components and other similar products that meet the needs of our customer base. You have taken a specific interest in part number 50186, a Crane Pumps And Systems Inc offering we carry that is listed alongside the NSN 3020-00-200-2107 to streamline identification and procurement. If you fill out and submit the Request for Quote (RFQ) form located below, you can secure pricing options for your comparisons. Within 15 minutes of one of our team members receiving and reviewing your submission, you can anticipate a customized response.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to make the procurement process more straightforward and efficient by offering comprehensive details for listed components whenever possible. For instance, part number 50186 was manufactured by Crane Pumps And Systems Inc under the CAGECode 96046. Moreover, by using the first digits of the NSN 3020-00-200-2107, we can see that this product belongs to FSC 3020 Gear Pulley Sprocket and Transmission Chain. Utilizing such information, you can ensure that you are securing precisely what you need to carry out operations or meet your project requirements. Keeping this in mind, obtain a quote on part number 50186 with our online services.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2107 Item PartTypeName: GEAR,HELICAL | 3020 | 002002107 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F400H401 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.0240 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.216 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 37.1734 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.313 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.063 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.0003 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1584 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5953 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.0625 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART |
| MATT | MATERIAL | IRON OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
