Defence NSN Source is a one-stop shop for Resistor Variable Wire Wound Pre components and other similar products that meet the needs of our customer base. You have taken a specific interest in part number 1601, a Bei Sensors And Systems Company Inc offering we carry that is listed alongside the NSN 5905-00-018-9870 to streamline identification and procurement. If you fill out and submit the Request for Quote (RFQ) form located below, you can secure pricing options for your comparisons. Within 15 minutes of one of our team members receiving and reviewing your submission, you can anticipate a customized response.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to make the procurement process more straightforward and efficient by offering comprehensive details for listed components whenever possible. For instance, part number 1601 was manufactured by Bei Sensors And Systems Company Inc under the CAGECode 11534. Moreover, by using the first digits of the NSN 5905-00-018-9870, we can see that this product belongs to FSC 5905 Resistors. Utilizing such information, you can ensure that you are securing precisely what you need to carry out operations or meet your project requirements. Keeping this in mind, obtain a quote on part number 1601 with our online services.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-018-9870 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000189870 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1601 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.498 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.562 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.560 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.186 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 1.40 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.0025 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 333.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 18876-10132431 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
