| MRC | Criteria | Characteristic |
|---|
| ABJT | TERMINAL LENGTH | 2.000 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.260 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.130 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 820.00 MILLIWATTS |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AEHZ | MAXIMUM OPERATING TEMP | 75.0 DEG CELSIUS |
| AEJA | THERMAL TIME CONSTANT IN SECONDS | 55.0 |
| AEJD | TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | -21.5 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| AEJD | TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 37.8 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| AEJE | ZERO POWER RESISTANCE AT SPECIFIED TEMP | 12.2 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| AEJE | ZERO POWER RESISTANCE AT SPECIFIED TEMP | 284.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| AEJF | RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -10.0/10.0 2ND RESISTANCE-TEMPERATURE POINT |
| AEJF | RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -18.0/18.0 1ST RESISTANCE-TEMPERATURE POINT |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CRQJ | ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -10.0 TO 10.0 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| SFTT | SURFACE TREATMENT | GOLD TERMINAL |
| STYL | STYLE DESIGNATOR | ROD |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEBT | TERMINAL DIAMETER | 0.020 INCHES NOMINAL |
| AEJB | POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 5.5 |
| AEJF | RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -18.0 TO 18.0 1ST RESISTANCE-TEMPERATURE POINT |
| CQWD | ZERO POWER RESISTANCE | 21.850 KILOHMS |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| TEST | TEST DATA DOCUMENT | 80063-SMC500444 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
